Telematics
Konvoi trackers
Our own trackers, built on Foundry for the cases standard hardware cannot cover.
For most fleets, a Ruptela, Transics or Teltonika tracker does the job. For the cases where it does not, Konvoi builds its own trackers on Foundry, our IoT platform. Hardware, firmware and sensors are made to fit the case, so a tracker can measure exactly what you need.
Konvoi’s container-tracking trackers are built this way. Positions and readings reach Konvoi within seconds of the tracker sending them, and firmware updates are delivered over the air.
What it brings
- Firmware and sensors made for your case
- Positions and readings within seconds
- Firmware updates over the air
- The same live map, alerts and reports as every other tracker
How to connect
- 01Tell us what you need to measure or follow.
- 02We build or adapt the tracker and fit it with you.
- 03It appears in Konvoi as a tracker; link it to its vehicle or asset.
Questions
When does a custom Konvoi tracker make sense?
When standard telematics cannot measure what you need: a sensor that does not exist off the shelf, or a signal your current box does not send. For ordinary vans and trucks, a Ruptela, Transics or Teltonika tracker is the simpler choice.
Put your fleet
On Autopilot
One platform for your whole transport operation: live telematics, compliance documents, fuel, drivers and inspections.
- We set up your workspace with you
- Cancel anytime
- GDPR compliant